- Pdh-multiplexer (25)
- Fiber Optic Media Converter (25)
- Fiber Optic Transceiver (24)
- Fiber Optic Patch Cord (24)
- TDM Over IP Converter (25)
- Fiber Optic Adaptor (23)
- Infrared Thermal Cameras (25)
- Telephone Optical Modem (24)
- Voice PCM Equipment (18)
- GBIC Transceivers (27)
- Digital Video Fiber Multiplexer (18)
op quality with multi mode dual fiber SC 2km
| Copper Interface: | RJ-45 port (Auto-MDI / MDI-X) Twisted Pair |
|---|---|
| Ports: | 1 x 10/100/1000Base-T port,1 x 1000Base-SX / LX port |
| Fiber interface: | SC |
| Mode: | Multi mode |
| Transmission distance: | 0-2km |
| Dimension (W x D x H): | 140x110x30mm |
| Operating Environment: | Temperature: 0~50 Degree C |
| Storage Environment: | Temperature: -40~70 Degree C |
| Humidity: | 5~90% non-condensing |
| Emission: | FCC Class A, CE Class A |
| Packaging Details: | Carton with 44 box,Carton Size : 62x43x34.5cm, Total Gross:22KG |
|---|---|
| Delivery Time: | 3-4 days after receive the payment |
| Payment Terms: | L/C,T/T,Western Union,MoneyGram |
| Supply Ability: | 1000 Pair/Pairs per Day |
| Minimum Order Quantity: | 1 Pair/Pairs |
1)Fibre Optic Converter manufacturer
2)Link fault pass through function
3)FCC part 15 CISPR ,VCCI Class A,ROHS,CE
4)OEM
Description
Fibre Optic Converter is 10/100/1000Mbps fast Ethernet converter. The converter mediates between a 10/100/1000Base-TX segment and a 1000Base-FX segment. It is primarily designed for large, higher speed/bandwidth demanding workgroups that require expansion of the Ethernet network. It can extend the conventional 100M Ethernet or 100/1000M Fast Ethernet to 20Km-120Km via the fast Ethernet Fiber-optical Line. It is high performance, cost effective and flexible solutions for a wide range of applications in the field of LAN campus network.
Featrures
- Provide one fiber connector and one UTP connector
- Fully complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.2ab 1000Base-TX, IEEE802.3z 1000Base-FX standard
- Auto-detection of half/full duplex transfer mode for TX port
- Auto-negotiation of 10/100/1000Mbpa rate and Auto-MDI/MDIX for TX port
- Provide switch configuration of half/full duplex transfer mode for FX port
- Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber
Indication light TP/ACT, FX/ACT, FDX, 1000,100 POW
Easy-to-view LED indicators provides status to easily monitor network activityInternal power suppl
Specification:
| Band Width | RJ 45 Port:10/100/100Mbps | Optical Port: 1.25Gbps |
| Standard Protocol | IEEE802.3 1000 Base-T standard | |
| IEEE802.3u 10/100/1000Base-SX/TX standard | ||
| IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree | ||
| IEEE 802.3z standard. | ||
| IEEE 802.3ab standard. | ||
| Connectors | UTP RJ-45 | SC/ST/FC Fiber connector |
| Operation Mode | Full /Half duplex mode | |
| Power Supply | External | 5V DC 2A |
| Interna | AC 100-250V/50~60Hz | |
| DC -36~-72V | ||
| Power Consumption | ≤5W | |
| LED Indicators | POW, FDX, TXLink / ACT, SPD, FXLink / ACT, FDX | |
| Environmental Parameters | Work Temperature | 0°C~50°C |
| Storage Temperature | -40°C~70°C | |
| Humidity | 5%~90% non-condensing | |
| TP Cable | Cat5 UTP cable | |
| Fiber-optic cable | 50 / 125µm or 62.5 / 125µm multi-mode fiber cable, up to 220 / 550m | 9 / 125µm single-mode cable, provides long distance for 20 /40/ 60/ 80/120km |
| Dimensions(mm) | External power supply | 94mm*70mm*25mm |
| Internal power supply | 140mm*110mm*30mm | |
| Socket Card | 157mm*128mm*31mm | |
| MTBF (Hours) | Over 50000 | |
| Emission/Safety | FCC Part 15 , Class A, RoHS and CE Mark | |
LED indicators:
TheLEDindicator lampsserve as device monitoring anderror display. The following
explainseach LED indicator:
Ordering information:
Network Application;
Packing
Delibery
Other details
